Concepts · 5 min read

Arithmetic and Geometric Sequences: Formulas and Examples

Arithmetic and Geometric Sequences: Formulas and Examples — illustration
In short: An arithmetic sequence adds the same amount each step, so 1 to 100 sums to 5,050; a geometric sequence multiplies by the same factor each step, so doubling on a chessboard reaches 18,446,744,073,709,551,615 grains in total.

Sequences in plain language

A sequence is an ordered list of numbers following a rule. Two rules are common enough to have names. In an arithmetic sequence you add a fixed number, the common difference d, to get from one term to the next. In a geometric sequence you multiply by a fixed number, the common ratio r.

ArithmeticGeometric
RuleAdd d each timeMultiply by r each time
Example5, 8, 11, 14, …3, 6, 12, 24, …
GrowthLinear (a straight line)Exponential (a curve)
nth terma₁ + (n − 1)da₁ × r^(n−1)

Arithmetic sequences

The nth term is a_n = a₁ + (n − 1) × d. For the sequence 5, 8, 11, 14, … with a₁ = 5 and d = 3, the 20th term is 5 + 19 × 3.

20th term of the sequence 5, 8, 11, 14, …
Answer62
Order-of-operations steps 3 steps

Start: 5 + (20 − 1) × 3

  1. Subtract
    20 − 1 = 19→ 5 + 19 × 3
  2. Multiply
    19 × 3 = 57→ 5 + 57
  3. Add
    5 + 57 = 62→ 62

The sum of the first n terms is S_n = n × (a₁ + a_n) ÷ 2, which is the number of terms times the average of the first and last. A famous story tells of the young Carl Friedrich Gauss quickly adding 1 to 100 by pairing numbers: 1 + 100, 2 + 99, and so on give 50 pairs of 101.

Sum of the whole numbers from 1 to 100
Answer5050
Order-of-operations steps 3 steps

Start: 100 × (1 + 100) ÷ 2

  1. Add
    1 + 100 = 101→ 100 × 101 ÷ 2
  2. Multiply
    100 × 101 = 10100→ 10100 ÷ 2
  3. Divide
    10100 ÷ 2 = 5050→ 5050

The answer is 5,050. The same formula applies to any arithmetic sequence; the 20-term example above sums to 20 × (5 + 62) ÷ 2 = 670.

Geometric sequences

The nth term is a_n = a₁ × r^(n−1). For 3, 6, 12, 24, … we have a₁ = 3 and r = 2, so the 10th term is 3 × 2⁹.

10th term of the sequence 3, 6, 12, 24, …
Answer1536
Order-of-operations steps 2 steps

Start: 3 × 2^9

  1. Exponent
    2^9 = 512→ 3 × 512
  2. Multiply
    3 × 512 = 1536→ 1536

The sum of the first n terms is S_n = a₁ × (1 − r^n) ÷ (1 − r) when r is not 1. For the first 10 terms of 3, 6, 12, …:

Sum of the first 10 terms of 3, 6, 12, 24, …
Answer3069
Order-of-operations steps 5 steps

Start: 3 × (1 − 2^10) ÷ (1 − 2)

  1. Exponent
    2^10 = 1024→ 3 × (1 − 1024) ÷ (1 − 2)
  2. Subtract
    1 − 1024 = −1023→ 3 × (−1023) ÷ (1 − 2)
  3. Subtract
    1 − 2 = −1→ 3 × (−1023) ÷ (−1)
  4. Multiply
    3 × (−1023) = −3069→ −3069 ÷ (−1)
  5. Divide
    −3069 ÷ (−1) = 3069→ 3069

That gives 3,069. When the ratio is between −1 and 1, the terms shrink and the sum of infinitely many terms settles to a₁ ÷ (1 − r). For 1, ½, ¼, … that is 1 ÷ (1 − 0.5) = 2. If |r| ≥ 1, the infinite sum does not settle.

Linear versus exponential growth

Compare an arithmetic sequence that starts at 3 and adds 3 with a geometric sequence that starts at 3 and doubles. At first they are close; soon they are not.

TermArithmetic (3 + 3(n−1))Geometric (3 × 2^(n−1))
133
266
3912
41224
51548
61896
824384
10301,536
0500100015002000n=1n=3n=5n=6n=8n=10Arithmetic, d = 3Geometric, r = 2Term number
The geometric sequence overtakes the arithmetic one and then pulls away.

By term 10 the arithmetic sequence is at 30 and the geometric one at 1,536. This is why compounding, as in compound interest, eventually dominates simple additions.

The chessboard story

The old legend of grain on a chessboard puts 1 grain on the first square and doubles on each square. That is a geometric sequence with a₁ = 1 and r = 2 over 64 squares. The total is 2⁶⁴ − 1 = 18,446,744,073,709,551,615 grains. It is a legend rather than a historical record, but the arithmetic is real, and it shows how fast repeated doubling grows.

You can test any term or sum yourself in the scientific calculator and see the order of operations worked out, or use the exponent calculator for large powers.

Common mistakes

  • Off-by-one in the exponent. The nth geometric term uses r^(n−1), not r^n.
  • Mixing up the two types. Check whether consecutive terms differ by a constant (arithmetic) or have a constant ratio (geometric).
  • Using the infinite-sum formula when |r| ≥ 1. It only applies when the terms shrink toward zero.
  • Forgetting the sign. A negative ratio flips the sign of alternate terms.

A quick check: compute the first two or three terms with your formula and confirm they match the list before trusting the later ones. For a related pattern, read about the Fibonacci sequence, which is neither arithmetic nor geometric.

Frequently asked questions

How do I tell if a sequence is arithmetic or geometric?

Subtract consecutive terms. If the difference is constant it is arithmetic. If instead the ratio of consecutive terms is constant it is geometric.

Can a sequence be both?

Only a constant sequence such as 4, 4, 4, … qualifies, with d = 0 and r = 1.

What is the common ratio?

It is the number you multiply by to get from each term to the next, found by dividing any term by the one before it.

Why does the geometric sum formula fail when r = 1?

Dividing by 1 − r would mean dividing by zero. When r = 1 every term is the same and the sum is simply n × a₁.

Written and reviewed by Mateuss M.

Mateuss M. writes and reviews mathematical content for CalcSolver, focusing on online calculators, formulas, equations, and practical math tools. He reviews calculator functionality, calculation methods, formulas, examples, and explanations to help ensure that each tool is clear, useful, and easy to understand.

Keep reading