How-to guides · 5 min read

Percent Error vs Percent Difference vs Percent Change

Percent Error vs Percent Difference vs Percent Change — illustration
In short: Percent change compares a new value with an old one, percent error compares a measurement with a known true value, and percent difference compares two values that have no "correct" one. They use different denominators, so mixing them up gives wrong answers.

Why three formulas?

All three measures take a difference between two numbers and express it as a percentage. What changes is the question being asked, and therefore what you divide by. Dividing by the wrong number is the most common reason two people get different answers from the same data.

MeasureQuestion it answersDivide by
Percent changeHow much did a value grow or shrink?The old (starting) value
Percent errorHow far is a measurement from the true value?The true (accepted) value
Percent differenceHow far apart are two comparable values?The average of the two values

Percent change

Percent change = (new − old) ÷ old × 100. The sign matters: positive means an increase and negative a decrease. The old value is the reference, so the direction of the comparison is built into the answer.

A price rises from 48 to 60: percent change
Answer25
Order-of-operations steps 3 steps

Start: (60 − 48) ÷ 48 × 100

  1. Subtract
    60 − 48 = 12→ 12 ÷ 48 × 100
  2. Divide
    12 ÷ 48 = 0.25→ 0.25 × 100
  3. Multiply
    0.25 × 100 = 25→ 25

The price rose by 25%. If it then fell back from 60 to 48, the change would be (48 − 60) ÷ 60 × 100 = −20%. The two percentages differ because each uses a different starting value, which is the same reason a 50% rise and a 50% fall do not cancel out. See percentage increase and decrease for more, or use the percentage change calculator.

Percent error

Percent error = |measured − true| ÷ |true| × 100. It is used in science and engineering classes to describe how accurate a measurement is. The absolute value signs mean the answer is not negative; some courses keep the sign to show whether the measurement was too high or too low, so follow the convention your course uses.

Measuring gravitational acceleration as 9.4 m/s² when the accepted value is 9.81: signed percent error
Answer-4.17940876656
Order-of-operations steps 3 steps

Start: (9.4 − 9.81) ÷ 9.81 × 100

  1. Subtract
    9.4 − 9.81 = −0.41→ −0.41 ÷ 9.81 × 100
  2. Divide
    −0.41 ÷ 9.81 = −0.04179408767→ −0.04179408767 × 100
  3. Multiply
    −0.04179408767 × 100 = −4.179408767→ −4.179408767

The measurement was about 4.18% too low. The denominator is the accepted value, never the measurement, because the question is how close you are to the truth.

Percent difference

Percent difference = |a − b| ÷ ((a + b) ÷ 2) × 100. Use it when neither number is the "right" one, such as comparing the prices of two shops or the results of two experiments. Dividing by the average makes the answer the same whichever number you call a or b.

Percent difference between 48 and 60
Answer22.2222222222
Order-of-operations steps 6 steps

Start: abs(48 − 60) ÷ ((48 + 60) ÷ 2) × 100

  1. Add
    48 + 60 = 108→ abs(48 − 60) ÷ (108 ÷ 2) × 100
  2. Divide
    108 ÷ 2 = 54→ abs(48 − 60) ÷ 54 × 100
  3. Subtract
    48 − 60 = −12→ abs(−12) ÷ 54 × 100
  4. Function
    abs(−12) = 12→ 12 ÷ 54 × 100
  5. Divide
    12 ÷ 54 = 0.2222222222→ 0.2222222222 × 100
  6. Multiply
    0.2222222222 × 100 = 22.22222222→ 22.22222222

The result is 22.22%. Compare that with the 25% change from 48 to 60 and the 20% change from 60 to 48: the same two numbers produce three different percentages depending on the question.

Side-by-side comparison

Pair (a, b)Change a→bChange b→aPercent difference
48, 6025%−20%22.22%
100, 15050%−33.33%40%
20, 2525%−20%22.22%
80, 12050%−33.33%40%
0%12.5%25%37.5%50%25%Change a→b20%Change b→a22.2%Difference
The same pair, 48 and 60, gives three different percentages because each uses a different denominator.

The symmetric percent difference always sits between the two directional changes, which is a handy check on your arithmetic.

Practice problems

Problem 1. A shirt costs 40 last month and 46 now. Percent change = (46 − 40) ÷ 40 × 100 = 15%. The old price is the reference, so this is percent change.

Problem 2. A student measures the boiling point of water as 98.2 °C at sea level, where the accepted value is 100 °C. Percent error = |98.2 − 100| ÷ 100 × 100 = 1.8%. The accepted value is the reference, so this is percent error.

Problem 3. Two stores sell the same item for 80 and 92. Neither price is the right one, so use percent difference: 12 ÷ 86 × 100 = 13.95%. Say which question you are answering when you report a result.

Common mistakes

  • Using the new value as the denominator for percent change. The reference is the starting value.
  • Calling a difference between two prices "error". Error needs a known true value.
  • Subtracting percentages. Going from 20% to 25% is a rise of 5 percentage points but a 25% relative increase.
  • Rounding too early. Keep full precision until the final answer, then round once.

If you are unsure which to use, ask whether one number is a reference. A starting value gives percent change, a true value gives percent error, and two equal-status values give percent difference. To check any step, use the scientific calculator, which shows the order of operations.

Frequently asked questions

Can percent error be over 100%?

Yes. If the measurement is more than twice the true value or negative, the error exceeds 100% of the true value.

Is percent difference the same as percent change?

No. Percent change uses the starting value as the reference and has a direction. Percent difference uses the average of both values and has no direction.

Why is percent change not symmetric?

Because the denominator changes. A rise from 48 to 60 is 25% of 48, but the fall back is 20% of 60.

Should I keep the sign of percent error?

It depends on the course or convention. The signed version shows whether you were too high or too low; the absolute version only shows the size.

Written and reviewed by Mateuss M.

Mateuss M. writes and reviews mathematical content for CalcSolver, focusing on online calculators, formulas, equations, and practical math tools. He reviews calculator functionality, calculation methods, formulas, examples, and explanations to help ensure that each tool is clear, useful, and easy to understand.

Keep reading