How-to guides · 5 min read

Scientific Notation Explained: Rules, Examples and Conversions

Scientific Notation Explained: Rules, Examples and Conversions — illustration
In short: Scientific notation writes a number as a × 10^n, where a is at least 1 and less than 10. The speed of light, 299,792,458 m/s, becomes 2.99792458 × 10^8, which is far easier to read, compare and calculate with.

Why scientific notation exists

Some quantities in science and engineering are enormous and others are tiny. Writing the mass of an electron or the distance to a star with every zero is slow and invites mistakes: lose one zero and the answer is wrong by a factor of ten. Scientific notation moves all of the zeros into an exponent so that the digits that matter stay short and the size of the number is shown by a single small integer.

It also makes comparison easy. To see which of two numbers is larger, compare the exponents first. Only if they match do you need to look at the leading parts.

The format: a × 10^n

A number in scientific notation has two parts. The coefficient (also called the significand or mantissa) is a number from 1 up to but not including 10. The exponent n is an integer that says how many places the decimal point moved. A positive exponent means a large number and a negative exponent a number between 0 and 1.

Standard formScientific notationExponent tells you
5,0005 × 10^3Move the point 3 places right
72,4007.24 × 10^4Move the point 4 places right
0.033 × 10^-2Move the point 2 places left
0.0000525.2 × 10^-5Move the point 5 places left
11 × 10^0No move

You can convert any value with the scientific notation converter, which shows the same steps as below.

Converting to scientific notation

  • Place the decimal point after the first non-zero digit.
  • Count how many places you moved it. That count is the size of the exponent.
  • If you moved the point left (the original number was large) the exponent is positive. If you moved it right (the number was small) the exponent is negative.
  • Drop trailing zeros that are not significant, and keep the digits you were given.

Take 4,560,000. Moving the point 6 places left gives 4.56 × 10^6. For 0.00071, moving the point 4 places right gives 7.1 × 10^-4. Going back is the reverse: 4.56 × 10^6 means move the point 6 places right, giving 4,560,000.

Real constants in scientific notation

QuantityStandard formScientific notation
Speed of light in a vacuum (m/s, exact)299,792,4582.99792458 × 10^8
One astronomical unit (m, exact)149,597,870,7001.495978707 × 10^11
Avogadro constant (per mole, exact since 2019)602,214,076,000,000,000,000,0006.02214076 × 10^23
Mass of an electron (kg, approximate)0.000000000000000000000000000000910938379.1093837 × 10^-31
012.52537.5503110^-31810^81110^112310^23
Size of the exponent (ignoring sign) for the four constants above: the exponent alone shows how extreme each value is.

The exact digits of these constants come from internationally agreed definitions for the speed of light, the astronomical unit and the Avogadro constant. The electron mass is a measured value with some uncertainty, so it is shown rounded.

Multiplying and dividing

Multiply the coefficients and add the exponents. Divide the coefficients and subtract the exponents. If the coefficient ends up outside the range 1 to 10, adjust it and change the exponent to match.

(3.2 × 10^5) × (1.5 × 10^3) written out in full
Answer480000000
Order-of-operations steps 5 steps

Start: (3.2 × 10^5) × (1.5 × 10^3)

  1. Exponent
    10^5 = 100000→ (3.2 × 100000) × (1.5 × 10^3)
  2. Exponent
    10^3 = 1000→ (3.2 × 100000) × (1.5 × 1000)
  3. Multiply
    3.2 × 100000 = 320000→ 320000 × (1.5 × 1000)
  4. Multiply
    1.5 × 1000 = 1500→ 320000 × 1500
  5. Multiply
    320000 × 1500 = 480000000→ 480000000

By the rule: 3.2 × 1.5 = 4.8 and 5 + 3 = 8, so the answer is 4.8 × 10^8, which is 480,000,000. Now a case that needs adjusting: (6 × 10^4) × (5 × 10^3) = 30 × 10^7, which is rewritten as 3 × 10^8.

For division, (8.4 × 10^9) ÷ (2.1 × 10^4) = 4 × 10^5 because 8.4 ÷ 2.1 = 4 and 9 − 4 = 5. Check any result against the scientific calculator, which accepts numbers in this form.

Adding and subtracting

Addition and subtraction need matching exponents first. Rewrite one number so both use the larger exponent, add the coefficients, then tidy up.

StepWorking
Start(4.5 × 10^6) + (3.2 × 10^5)
Match exponents4.5 × 10^6 + 0.32 × 10^6
Add coefficients4.82 × 10^6
Check4,820,000 = 4.82 × 10^6

A very common mistake is to add the exponents when adding numbers. Exponents are only added when multiplying.

Comparing sizes with orders of magnitude

An order of magnitude is a factor of ten. Two numbers differ by n orders of magnitude when their exponents differ by n (after both are written in scientific notation). A quick comparison can be made like this:

ABLargerA ÷ B
3.2 × 10^84.5 × 10^6A71.111
7.1 × 10^-39.4 × 10^-5A75.532
6 × 10^231.2 × 10^24B0.5

Always check the exponent first: 10^-3 is larger than 10^-5 even though 5 is the bigger number, because negative exponents describe smaller values as they grow more negative.

Significant figures and calculator notation

The digits in the coefficient show how precisely a value is known. 3.0 × 10^4 claims two significant figures; 3.000 × 10^4 claims four. When you write a measurement in scientific notation, keep only the digits that are justified by the measurement.

Calculators and spreadsheets often display scientific notation using the letter E, as in 3.2E5 meaning 3.2 × 10^5. This is a display format and not the same as Euler’s number e, which is about 2.71828. Learn more about that constant in what is Euler’s number e, and about the rounding of digits in how to round numbers.

Frequently asked questions

Why must the coefficient be between 1 and 10?

It makes the form unique. Without that rule, 5,000 could be written as 5 × 10^3, 50 × 10^2 or 0.5 × 10^4, which makes comparing numbers harder.

What does a negative exponent mean?

The number is smaller than 1. 10^-3 is 0.001, which is one thousandth.

Is 0.5 × 10^4 scientific notation?

Not in strict form, because the coefficient is below 1. Rewrite it as 5 × 10^3.

What is the difference between E notation and e?

E notation, like 2E5, means 2 × 10^5 and is just a display style. The constant e is about 2.718 and is the base of natural logarithms.

Written and reviewed by Mateuss M.

Mateuss M. writes and reviews mathematical content for CalcSolver, focusing on online calculators, formulas, equations, and practical math tools. He reviews calculator functionality, calculation methods, formulas, examples, and explanations to help ensure that each tool is clear, useful, and easy to understand.

Keep reading